TS SBTET C-18 CURRICULUM PREAMBLE, RULES AND REGULATIONS

The State Board of Technical Education and Training, Telangana has introduced the C18 curriculum. The students who are joined in 2018 onwards they are comes under C18 regulation. Why The TS SBTET Changed their regulation is given in detail on below. The students who want to join under TS SBTET they must know the preamble, Rules & Regulations introduced by the Telangana state board. To help you we are given in simple pattern here. So check below for more details and Rules and Regulations made by the board. For more info On TS SBTET C18 scroll down and read the full article.

Preamble

The State Board of Technical Education and Training, Telangana under the aegis of the Department of Technical Education, Telangana generally reviews the Curricula to tune up the updated development both in academic and industry side. However, recognizing the changing needs as stated by the user industries, the Board has decided to bring forward the revision of curriculum. Consequently, the Board with the assistance of senior faculty of the concerned branches has performed the evaluation of C-16 Curriculum in force. On finding the merits and demerits of C-16 Curriculum the faculty have made a thorough assessment of the curricular changes that have to be brought in. It was felt that there is an urgent need to improve hands-on experience among the students pursuing diploma courses. Further, the urgency of enhancing communication skills in English was also highlighted in the feedback and suggestions made by the user industries. Keeping these in view, a number of meetings and deliberations were held at state level, with experts from industry, academia and senior faculty of the department. The new Curricula for the different diploma courses have been designed with the active participation of the members of the faculty teaching in the Polytechnics of Telangana, besides reviewed by Expert Committee constituted with eminent academicians.

The primary objective of the curriculum change is to produce best technicians in the country by correlating growing needs of the industries with the academic input.

The revised New Curriculum i.e., Curriculum – 2018 or C-18 is planned and designed making 6 months industrial training optional in 6th semester to give more choice to students

TS SBTET C18 Salient Features:

1. Duration of course is 3 years of Regular Academic Instruction.

The Curriculum is Outcome based and entirely Semester Pattern. More practical oriented , Flexible , Relevant to the industry needs, Develop entrepreneur ship skills
Specialized electives can be pursued from MOOC like SWAYAM / NPTEL
A maximum of 20% credits may be permitted under the above clause
To start with a robust curriculum structure is designed
course structure contains 5 theory courses and 5 Laboratory courses per semester
All theory courses will be of Lecture –Tutorial-Practicals (LTP) pattern
In order to ensure continuous evaluation total course content is divided into 3 parts i.e., Mid Sem I should be conducted from part I and Mid Sem II should be conducted from part II, End Examination shall be conducted for 40 marks of which 20 marks should be covered from part III, 20 marks covered from overall course content.
The sessional marks of 20 are assigned to slipt test, assignments, seminars, quiz etc.
The question paper pattern is comprising of short answer questions, Essay questions, Application based Questions covering the attributes of understanding, remembering and Application.
Scoring of the candidate in the examination is reflected in terms of grade points blending with relative grade point award system
  1. Keeping in view the increased need of communication skills which is playing a vital role in the success of Diploma Level students in the Industries, emphasis is given for learning and acquiring listening, speaking, reading and writing skills in English. Further as emphasized in the meetings, Communication Skills lab and Life Skills lab are introduced in III semester and Advanced Communication Skills lab and Life Skills lab as lab for elective IV in VI semester for all the branches.
  2. Modern topics relevant to the needs of the industry and global scenario suitable to be taught at Diploma level are also incorporated into the curriculum.
  3. CAD specific to the branch has been given more emphasis in the curriculum. Preparing drawings using CAD software has been given more importance.
  4. Every student is exposed to the computer lab at the 1st year itself in order to familiarize himself/herself with skills required for keyboard/mouse operation, internet usage and e-mailing.
  5. The number of teaching hours allotted to a particular topic/chapter has been rationalized keeping in view the past experience.
  6. Upon reviewing the existing C-16 curriculum, more emphasis is given to the practical content of Laboratories and Workshops, thus strengthening the practical skills.
  7. With increased emphasis for the student to acquire Practical skills, the course content in all the courses is thoroughly reviewed and structured as outcome based than the conventional procedure based. While the course content in certain courses felt overloaded is reduced, in rest of the courses the content has been enhanced as per the need.
  8. Curriculum of Laboratory and Workshops have been thoroughly revised based on the suggestions received from the industry and faculty, for better utilization of the equipment available at the Polytechnics. The experiments /exercises that are chosen for the practical sessions are identified to conform to the field requirements of the industry.
  9. The Members of the working group are grateful to Sri Navin Mittal I.A.S., Commissioner of Technical Education & Chairman, S.B.T.E.T.(TS) for his constant guidance and valuable inputs in revising, modifying and updating the curriculum.
  10. The Members acknowledge thanks for cooperation and guidance extended by Sri. D. Venkateswarlu, Secretary and his team of SBTET, Telangana and other officials of Directorate of Technical Education and the State Board of Technical Education, Telangana, experts from industry, academia from the universities and higher learning institutions and all teaching fraternity from the Polytechnics who are directly and indirectly involved in preparation of the curricula.

TS SBTET C-18 CURRICULUM PREAMBLE, RULES AND REGULATIONS

TS SBTET C18 RULES AND REGULATIONS

1. ADMISSION PROCEDURES: 1.1 DURATIONANDPATTERNOFTHECOURSES All the Diploma programs run at various institutions are of AICTE approved 3 years duration of Academic Instruction. All the Diploma courses are run on semester wise pattern.

MEDIUM OF INSTRUCTION: The medium of instruction and examination shall be English.

PERMANENT IDENTIFICATION NUMBER (PIN): A cumulative / academic record is to be maintained of the Marks secured in sessional work and end examination of each year for determining the eligibility for promotion etc., a Permanent Identification Number (PIN) will be allotted to each candidate so as to facilitate this work and
avoid errors in tabulation of results.

NUMBER OF WORKING DAYS PER SEMESTER/YEAR:

  • The Academic year for all the Courses usually shall be from June 1st week of the year of admission to the 31st March of the succeeding year.
  • The Working days in a week shall be from Monday to Saturday
  • There shall be 7 periods of 50 minutes duration on all working days.
  • The minimum number of working days for each semester / year shall be 90 / 180 days excluding examination days. If this prescribed minimum is not achieved due to any reason, special arrangements shall be made to conduct classes to cover the syllabus

ELIGIBILITY OF ATTENDANCE TO APPEAR FOR THE END EXAMINATION

  • A candidate shall be permitted to appear for the end examination in all courses, if he or she has attended a minimum of 75% of working days during the year/Semester.
  • Condonation of shortage of attendance in aggregate upto 10% (65% and above and below 75%) in each semester or 1st year may be granted on medical grounds.
  • Candidates having less than 65% attendance shall be detained.
  • Students whose shortage of attendance is not condoned in any semester are not eligible to take their end examination of that class and their admissions shall stand cancelled. They may seek re-admission for that semester when offered next.
  • A stipulated fee shall be payable towards condonation for shortage of attendance.

READMISSION: Readmission shall be granted to eligible candidates by the respective Principal for the students who
applies for readmission within one year i.e., subsequent next academic year. Otherwise, it has to referred to the RJD.

  1. Within 15 days after commencement of class work in any semester (Except industrial Training).
  2. Within 30 days after commencement of class work for D. Pharmacy course since it is year wise pattern.

Otherwise such cases shall not be considered for readmission for that semester / year and are advised to seek readmission in the next subsequent eligible semester/academic year.

The percentage of attendance of the readmitted candidates shall be calculated from the first day of beginning of the regular class work for that year / Semester, as officially announced by CTE/SBTET but not from the day on which he/she has actually reported to the class work, after readmission is granted.

Mandatory Industrial Training:

Every student must undergo Industrial training during their course work during summer vacation

1. After II Semester Six to eight weeks of Industrial training / Skill development modules by TASK

2. After IV Semester Six to eight weeks of Industrial training

Rules and Regulations in the Curriculum C18

Scheme Of Examination:

Theory Examination: I,II,III, IV, V and VI Semesters:

  • Each semester end examination carries 40 marks in respect of specified courses of 3hours duration, along with 60 marks for continuous internal evaluation.
  • The Semester End Examination paper shall be set for 80 marks and scaled to 40 marks.

Practical Examination:

  • Each laboratory course carries 40 marks of 3hours duration and 60 sessional marks.

Assessment Scheme: In order to ensure continuous evaluation

End Examination40 %
Mid Sem 120 %
Mid Sem 220 %
Tutorials20 %
Total marks100 Mark
  • Total course content shall be divided into three parts as Part 1, Part 2, Part 3.
  • Mid sem 1 Exam should be conducted from Part 1.
  • Mid sem II Exam should be conducted from Part 2.
  • End Examination to be conducted for 40 marks of which End Examination 40 % Mid Sem 1 20 % Mid Sem 2 20 % Tutorials 20 % Total marks 100 Marks.
  • 20 Marks should be covered from Part 3.
  • Remaining 20 marks covered from overall course contents.

The tutorial shall consist of following marks division:

Slip test 15 Marks
Slip test 25 Marks
Assignments5 Marks
Seminar5 Marks

Midsem Question paper pattern (40 marks to be halved for aggregate)

  • Part A shall consist of short answer questions
  • Part B shall consist of Essay questions
  • Part C shall be of Application based Questions

End Sem Examinations (Set to 80 Marks and Scale to 40 Marks):

  1. The Regular Examinations and Backlog Examinations shall be conducted separately.
  2. Backlog examinations should be held before the commencement of Academic year to give sufficient time for the student to prepare for Backlog examinations.

TS SBTET C18 Examination Pattern:

Part APart 3 Unit 5&6Short answer questions
Entire syllabusShort answer questions
Part BPart 3 Unit 5&6Essay questions
Entire syllabusEssay questions
Part CPart 3 Unit 5&6Application        based

questions

Entire syllabusApplication        based

questions

TS SBTET C18 Grades:

The scale of credit points in the form of Grades is as follows with indicative percentages in the branches

A+–10 (> 90%)A—9 (80-89.5%) B+–8 (70-79.5%) B—7 (60-69.5%)

C+–6 (50-59.5%) C—5 (40-49.5%) D—4 (35-39.5%) E—0-<4 (< 35%)

Pass Criteria: The minimum marks required for passing in any course are as given below

  • Cumulative 35 % ( Mid Sem 1+ Mid Sem2 +Tutorials + End Examination) and End Examination 35 % (i.e. 14 marks)
  • More than 50% in End Examination if cumulative is less than 35 %.

Credits:

  1. For theory courses– 3 Credits
  2. For Laboratory courses- 1.5 Credits
  3. Other courses 2.5 Credits

Total credits per semester 25 Credits

  • CGPA will be calculated for Regular Examinations only.
  • Minimum credits for obtaining Diploma are 130 out of 150.

Electives:

The students are permitted to choose one elective from IV semester.

V Semester: The student has to complete one minor project in addition to two core courses, two electives and Four Laboratory courses

  • The credits for minor project work are equal to one theory course and One Laboratory course i.e. 4.5 credits (200 Marks)

VI semester :

  • The student can opt either Industrial Training or course work
  • The course work for VI Semester consists of three electives (theory) and Three Laboratory courses and one Major Project work.
  • The credits for Major project work are equal to two theory courses and two Laboratory
    courses i.e. 9 credits (400 marks)

Theory Courses: Theory Courses carry 20 % for Mid Sem I and 20 % for Mid Sem II and 20% for Tutorials which consists of Slip Test-I 5 Marks, Slip Test-II 5 Marks, Assignment-5 Marks and Seminar -5 Marks. Mid Sem examinations will be conducted on the dates specified by SBTET. The remaining 40% of theory will be conducted as End Semester Exam.

Practicals: Student’s performance in Laboratories / Workshop shall be assessed during each semester of study for 60 marks in each practical course. Allotment of internal Assessment marks of 30% should be discrete taking into consideration of the students skills, accuracy, recording and 20% of internal marks for performance of the task assigned to him / her lab practicals assessment test and 10% for records. Each student has to write a record/log book for assessment purpose. In the course of Drawing, which is also considered as a practical paper, the same rules hold good. Drawing exercises are to be filed in seriatim.

Internal assessment in Labs/workshops/Survey field etc., during the course of study, shall be done and sessional marks shall be awarded by the concerned Lecturer / Senior Lecturer / Workshop superintendent with the concurrence of concerned HOS as the case may be.

For practical examinations, except in drawing, there shall be two examiners. External examiner shall be appointed by the Principal in consultation with the respective head of the department preferably choosing a person from an Industry/Academician. At least one External Examiner from Industry should be appointed for core labs. The Internal examiner shall be the person concerned with internal assessment as in above. The end examination shall be held along with all theory papers in respect of drawing.

Question Paper for Practicals: Question paper should cover all the experiments/exercise prescribed.

Records pertaining to internal assessment marks of both theory and practical courses are to be maintained for official inspection.

Evaluation and assessment of industrial training shall be done and marks are awarded in the following manner.

Industrial assessment200 marks (in two spells of 100 marks each)
Maintenance of log book60 marks
Record Work60 marks
Seminar / viva-voce80 marks
Total400 marks

The assessment at the institute level will be done by a minimum of three members Internal Faculty, Industrial Experts and H.O.D. and be averaged.

Minimum Pass Marks

Theory Examination:

Pass Criteria: The minimum marks required for passing in any course are as given below

  • Cumulative 35 % ( Mid Sem 1+ Mid Sem2 +Tutorials + End Examination) and End Examination 35 % (i.e. 14 marks)
  • More than 50% in End Examination if cumulative is less than 35 %

Practical Examination:

For passing a practical course, a candidate has to secure, a minimum of 50% in end examination and a combined minimum of 50% of both sessional and practical examination marks put together. In case of D.C.C.P., the pass mark for typewriting and shorthand is 45% in the end examination. There are no sessional marks for typewriting and Shorthand courses of D.C.C.P course.

Provision For Improvement

CGPA will be calculated for Regular Examinations only:

  1. Improvement is allowed only after he/she has completed all the courses from First Semester to the Final semester of the Diploma.
  2. Improvement is allowed in any 4 (Four) courses of the Diploma.
  3. The student can avail of this improvement chance only once, that too within the succeeding two examinations after the completion of Diploma, with the condition that the duration including Improvement examination shall not exceed FIVE years from the first admission.
  4. No improvement is allowed in Practical / Lab courses or Project work or Industrial Training assessment. However, improvement is allowed in drawing course.
  5. If improvement is not achieved, the marks obtained in previous Examinations holds good.
  6. Improvement is not allowed in respect of the candidates who are punished under Mal-practice in any Examination.
  7. Examination fee for improvement shall be paid as per the notification issued by State Board of Technical Education and Training from time to time.
  8. All the candidates who wish to appear for improvement of performance shall deposit the original Marks Memos of all the years / Semesters and also original Diploma Certificate to the Board. If there is improvement in performance of the current examination, the revised Memorandum of marks and Original Diploma Certificate will be issued else the submitted originals will be returned.

Rules Of Promotion To The Next Level

For Diploma Courses for 1st ,2nd, 3rd, 4th , 5th and 6th Semesters:

  1. A candidate shall be permitted to appear for first Semester examination provided he / she puts the required percentage of attendance (i.e., 75%) and pays the examination fee. However, attendance can be condoned by the Principal on Medical grounds upto 10% ( i.e. attendance after condonation on Medical grounds should not be less than 65%) and he/she has to pay the condonation fee along with examination fee as prescribed by SBTET from time to time.
  2. A candidate shall be promoted to 2 nd semester if he/she puts the required percentage of attendance (i.e., 75% in general and 65% on medical grounds) in the first semester and pays the examination fee. A candidate who could not pay the first semester examination fee has to pay the promotion fee as prescribed by State Board of Technical Education and Training from time to time before commencement of 2 nd semester.
  3. A candidate is eligible to appear for the 2nd semester exam if he/she puts the required percentage of attendance (i.e., 75% in general and 65% on medical condonation) in the 2nd semester.
  4. A candidate shall be promoted to 3rd semester if he/she puts the required percentage of attendance (i.e., 75% in general and 65% on medical grounds) in the 2 nd semester and pays the examination fee. A candidate who could not pay the 2 nd semester examination fee has to pay the promotion fee as prescribed by State Board of Technical Education and Training from time to time before commencement of 3 rd semester.
  5. A candidate is eligible to appear for the 3rd semester exam if he/she puts the required percentage of attendance (i.e., 75% in general and 65% on medical condonation) in the 3rd semester.
  6. A candidate shall be promoted to 4th semester provided he/she puts the required percentage of attendance (i.e., 75% in general and 65% on medical condonation) in the 3 rd semester and pays the examination fee. A candidate, who could not pay the 3rd semester exam fee, has to pay the promotion fee as prescribed by State Board of Technical Education and Training from time to time before commencement of 4th semester.
  7. A candidate is eligible to appear for the 4th semester exam if he/she Puts the required percentage of attendance (i.e., 75% in general and 65% on medical grounds) in the 4th semester and pays exam fee. Should not have failed in more than 4 backlog courses of 1st and 2 nd semester put together.
  8. For IVC students: Puts the required percentage of attendance (i.e., 75% in general and 65% on medical grounds) in the 4th semester. Should not have failed in more than 2 backlog courses of III Semester.
  9. A candidate shall be promoted to 5th semester provided he / she puts the required percentage of attendance (i.e., 75% in general and 65% on medical grounds) in the 4th semester and pays the examination fee. A candidate, who could not pay the 4th semester examination fee, has to pay the promotion fee as prescribed by State Board of Technical Education and Training from time to time before commencement of 5th semester as the case may be.
  10. A candidate is eligible to appear for the 5th semester exam if he/she Puts the required percentage of attendance in the 5th semester Should have appeared for 4th semester examination.
  11. A candidate shall be promoted to 6th semester provided he / she puts the required percentage of attendance (i.e., 75% in general and 65% on medical grounds) in the 5th semester and pays the examination fee. A candidate, who could not pay the 5th semester examination fee, has to pay the promotion fee as prescribed by State Board of Technical Education and Training from time to time before commencement of 6th semester as the case may be.
  12. A candidate is eligible to appear for the 6th semester (Theory) exam if he/she Puts the required percentage of attendance in the 6th semester and Should have appeared for 5th semester examination.
  13. A candidate is eligible to appear for 6th (Industrial Training) semester examination if he/she Puts the required percentage of attendance i.e., 90% in 6th semester (Industrial Training) and Should have completed the Industrial Training and Should have submitted Industrial Training assessment report.

Othet Important Details

  1. In case a candidate does not successfully complete the Industrial training, he / she will have to repeat the training at his / her own cost.
  2. The first spell of Industrial training shall commence 10 days after the completion of the last theory examination of 2nd semester.
  3. The Second spell of Industrial training shall commence within 10 days after the completion of 4th semester besides successful completion of 1st spell of Industrial training.
  4. Each Semester of Institutional study shall be a minimum of 90 working days. (With 6 working days in a week i.e. from Monday to Saturday, with 7 periods of 50 minutes, duration per day).

Evaluation Of Student Performance

AWARD OF DIPLOMA:

The scale of credit points in the form of Grades is as follows with indicative percentages in the branches.

A+–10 (> 90%) A—9 (80-89.5%) B+–8 (70-79.5%) B—7 (60-69.5%)

C+–6 (50-59.5%) C—5 (40-49.5%) D—4 (35-39.5%) E—0-<4 (< 35%)

Successful candidates shall be awarded the Diploma under the following divisions of pass.

  1. First Class with Distinction shall be awarded to the candidates who secure an overall aggregate of 75% marks and above.
  2. First Class shall be awarded to candidates who secure an overall aggregate of 60% marks and above and below 75% marks.
  3. Second Class shall be awarded to candidates who secure a pass with an overall aggregate of below 60%.
  4. The Weightage of marks for various year/Semesters which are taken for computing overall aggregate shall be 25% of I year marks + 100% of 3rd and subsequent Semesters. With respect to the intermediate vocational candidates who are admitted directly into diploma course at the 3rd semester (i.e., second year) level the aggregate of (100%) marks secured at the 3 rd and subsequent semesters of study shall alone be taken into consideration for determining the overall percentage of marks secured by the candidates for award of class/division.
  5. Second Class shall be awarded to all students, who fail to complete the Diploma in the regular three years and four subsequent examinations, from the first admission.

Examination Fee Schedule

The examination fee should be paid as per the notification issued by State Board of Technical Education and Training from time to time.

Structure Of End Examination Question Paper

TestUnitsMarksPattern
Mid Sem 11 and 220Part A 5 Short answer questions Part B 2 Essay questions out of 3 Questions Part C 2 Essay questions out of 3 Questions
Mid Sem 23 and 420

Part A 5 Short answer questions Part B 2 Essay questions out of 4 Questions Part C 2 Essay questions out of 3 Questions

Slip Test 11 and 252 Essay Questions out of 3 Questions
Slip Test 23 and 452 Essay Questions out of 3 Questions
Assignment15

Different group assignments of Higher order Questions that develop problem solving skills and critical thinking should be given

Seminars15
Total60

Semester End Examination Pattern

  • Part-A Ten short answer questions. all questions are to be answered ( each question carries 2 marks 10X2. Questions from all the three modules).
  • Part-B Six Essay type questions. Answer four questions two from each Group. (4X5=20) (one question from each unit).
  • Part-C Six Application level questions. Answer four questions two from each Group. (4X10=40).
  • The question paper for theory examination is patterned in such a manner that the Weightage of periods/marks allotted for each of the topics for a particular course be considered.
  • Examination paper is of 3/6/9 hour’s duration for General and Architectural and Assistantship respectively.
  • For Engineering Drawing Course (107) consist of section ‘A’ and section ‘B’. Section ‘A’ contains four (4) questions. All questions in section ‘A’ are to be answered and each question carries 5 marks. Max. Marks: 4 x 5=20. Section ‘B’ contains six (6) questions. Out of which four (4) questions are to be answered and each question carries 10 Marks. Max. Marks 4 x 10 = 40.

Practical Examinations- For Workshop practice and Laboratory Examinations:

Each student has to pick up a question paper distributed by Lottery System.

HandlingManipulationPrecisionGraphs/PresentationInference/ResultVivavoice
5 marks5 marks10 marks10 marks5 marks5 marks

Issue Of Memorandum of Marks

All candidates who appear for the end examination will be issued the memorandum of marks without any payment of fee. However, candidates who lose the original memorandum of marks have to pay the prescribed fee to the Secretary, State Board of Technical Education and Training, Telangana. for each duplicate memo.

Maximum Period For Completion Of Course

Maximum period for completion of the course is twice the prescribed duration of the course from the date of the First admission (includes the period of detention and discontinuation of studies by student etc) failing which they will have to forfeit the claim for qualifying for the award of Diploma (They will not be permitted to appear for examinations after that date). This rule applies to all Diploma courses of 3 years of engineering and non-engineering courses including candidates seek admission under lateral entry. In respect of Pharmacy courses, the completion period s 4 years as the prescribed duration of the course is 2 years.

Eligibility For Award Of Diploma

A candidate is eligible for the award of Diploma Certificate if he/she fulfill the following academic regulations.

  • He / She pursued a course of study for not less than 3 academic years & not more than 6 academic years.
  • He/she have completed all the courses.
  • Students who fail to fulfill all the academic requirements for the award of the Diploma within 6 / 7 academic years from the year of admission shall forfeit their seat in the course & their seat shall stand canceled.

Recounting, Issue of photocopy of Valued answer script & Reverification

A candidate desirous of applying for Recounting/ issue of Photocopy of valued answer scripts/ Reverification should submit the application to the Secretary, State Board of Technical Education and Training, Telangana., Hyderabad – 500 063 within 15 days from the date of receipt of Tabulated Marks Statement by the Principal of concerned Polytechnic or the date specified in the notification issued for Reverfication/Recounting. Recounting shall be done for any TWO theory courses per Year/Semester only, including drawing courses.

No request for recounting shall be entertained from any candidate who is reported to have resorted to Malpractice in that examination. The fee prescribed for Recounting should be paid by way of Demand Draft drawn on any Scheduled Bank payable at Hyderabad in favor of the Secretary, State Board of Technical Education and Training, Telangana., Hyderabad. The verification of the totaling will be done by an Officer of the Board and will be intimated to the candidate by post only.

The following documents should be invariably be enclosed with the application failing which the application will not be considered.

  1. Marks secured as per Tabulated Marks Sheet certified by the Principal.
  2. The payment of the prescribed fee shall be online as notified in the circular issued from time to time.
  3. Self – addressed and stamped envelopes of 11″ X 5″ size.

The applications received after the prescribed date will not be accepted and any correspondence in this regard will not be entertained

For Issue of Photocopies of Valued answer Scripts

  1. A candidate desirous of applying for Photocopy of valued answer script/ scripts should submit the application to the Secretary, State Board of Technical Education and Training, Telangana., Hyderabad – 500 063 along with the required fee in the form of Demand Draft within 07 days from the date of receipt of Tabulated Marks Statement by the Principal of concerned Polytechnic or the date specified in the covering letter whichever is earlier.
  2. Photo copies of valued answer scripts will be issued to all theory courses including drawing courses.

The following documents should invariably be enclosed with the application

  1. Marks secured as per Tabulated Marks Sheets certified by the Principal
  2. Self-addressed Stamped Envelope/Cloth-line cover of size 10’’ x 14’’.
  3. Fee in the form as notified from time to time.

For Re-Verification Of The Valued Answer Script

  1. A candidate desirous of applying for Re-verification of valued answer script should submit the application to the Secretary, State Board of Technical Education and Training, Telangana., Hyderabad – 500 063 along with the required fee in the form of Demand Draft, within 15 days from the declaration of result.
  2. Re-verification of valued answer script shall be done for all theory courses including drawing courses.

The following documents should invariably be enclosed with the application failing which the application will not be considered.

  • Marks secured as per Tabulated Marks Sheets certified by the Principal.
  • Fee in the form of Demand Draft.

Malpractice cases

If any candidate resorts to any Mal Practice during examinations, he/she shall be booked and the Punishment shall be awarded as per rules and regulations framed by SBTET, TS from time to time.

Discrepancies/ Pleas:

Any Discrepancy regarding results etc., shall be represented to the Board within one month from the date of issue of results. Thereafter, no such cases shall be entertained in any manner.

Issue Of Certificates And Veto

Issue Of Duplicate Diploma:

If a candidate loses his/her original Diploma Certificate and desires a duplicate to be issued he/she should produce written evidence to this effect. He / she may obtain a duplicate from the Secretary, State Board of Technical Education and Training, Telangana on payment of prescribed fee and on production of an affidavitsigned before a First Class Magistrate (Judicial) and non-traceable certificate from the Department of Police. In case of damage of original Diploma Certificate, he/she may obtain a duplicate certificate by surrendering the original damaged certificate on payment of a prescribed fee to the State Board of Technical Education and Training. In case the candidate cannot collect the original Diploma within 1 year from the date of issue of the certificate, the candidate has to pay the penalty prescribed by the SBTET from time to time.

Issue Of Migration Certificate And Transcripts

The Board on payment of the prescribed fee will issue these certificates for the candidates who intend to pursue Higher Studies in India or Abroad.

General

  • The Board may change or amend the academic rules and regulations or syllabi at any time and the changes or amendments made shall be applicable to all the students, for whom it is intended, with effect from the dates notified by the competent authority.
  • All legal matters pertaining to the State Board of Technical Education and Training are within the jurisdiction of Hyderabad.
  • In case of any ambiguity in the interpretation of the above rules, the decision of the Secretary, SBTET (TS) is final.

Leave a Reply

Your email address will not be published. Required fields are marked *